VolTage Stabilizer
|
Voltage stabilizer producer manufacturer in Germany Europe. In today’s modern technology age, demand of the power increases day by day which causes the stable voltage need for factories, hotels, hospital, industrial applications etc. Static Voltage Stabilizers regulate the voltage value which comes from the main city grid according to need of your field and machines and supply stable voltage value for your system. Static Voltage Stabilizer is an electrical appliance which does not include any moving part inside, are designed for the voltage regulation and management, protection for your loads to supply voltage stabilized electricity.
>Contact form >Read more |
Frequency Converter
|
Frequency converter producer manufacturer in Germany in Europe is an electronical device that converters the alternating current of grid from a frequency value or voltage to another one that is required by machines or systems. The intelligence and performance of the frequency converter solutions has been developed especially in the last years. The marine or industrial frequency converters are important to supply best converted electricity. The frequency converter 50Hz 60Hz 400Hz producer and manufacturer.
>Contact form >Read more |
Industrial UPS
|
Industrial UPS producer and manufacturer differs from an auxiliary or emergency power system or standby generator in that it will provide near-instantaneous protection from input power interruptions, by supplying energy stored in batteries, super capacitors, or flywheels. The on-battery runtime of most industrial uninterruptible power sources UPS is relatively short like only a few minutes can go up to 8 hours but sufficient to start a standby power source or properly shut down the protected electrical equipment in your facilities in Germany and Europe.
>Contact form >Read more |
Industrial Rectifier
|
industrial rectifiers are produced and manufactured by Germarel. The rectifiers are one of our strong units in our production line. A industrial rectifier is a complicated and high technological device that converts ac ( alternating current ) to dc ( direct current ). The electrical process is well known as rectification. These devices are commonly used as a part of power supplies. There are various uses of rectifiers, such as galvanizing, electroplating, static painting and oil cleaning. The rectifier solutions we offer come with the thyristor technology and a switch mode. Germarel is the producer and manufacturer of rectifiers for electrolysis and anodizing and electro plating.
>Contact form >Read more |
Battery Charger
|
Battery charger produced and manufactured by Germarel in Germany Europe. specially industrial one is a device to put energy into a secondary cell or rechargeable batter by pushing electrical current inside it. The industrial charging for the batteries' protocol changes according to size and type of the batteries that are being charged. An industrial battery charger is used when there is no energy on your batteries. When a battery is fully charged, the charging current will be wasted. Environmentally design of the industrial chargers for batteries do not a disservice for environment. The system which saves %40 energy. Switch Mode Battery Charge Devices, the new member of mak plus power systems battery charge group, serves more than your expectations.
>Contact form >Read more |
Industrial Inverter
|
industrial Inverter is produced manufactured as an electrical device which is used to change to direct current DC to alternating current AC in Germany in Europe. The industrial inverter does not supply any power if is not needed to the loads, the power supplied by DC source to inverter like batteries or dc motors are converter to AC for your industrial application. According to design of the specific device or machine, output voltage, input voltage customized and frequency can be arranged and simulated. Industrial Inverter can be designed entirely electronic or combination of mechanical parts and electronic. Industrial electric lights, kitchen electrical machines, home devices need AC current to work. At this point, usage of power inverter is important to changed DC current to AC current. The industrial inverter do the opposite of DC - AC rectifiers work.
>Contact form >Read more |
Transformer
|
Transformer is produced and manufactured by Germarel GmbH in Europe in Germany. The transformer is used to transform the electrical power which is provided from AC (alternating current) power source, usually for safety reasons. Isolation transformer, step up transformer and step down Transformers have been used for several industrial application, they transfer electrical energy between two or more circuits. In addition to this, transformers reduce electrical and electromagnetical interruptions from other power sources and devices.
>Contact form >Read more |
Battery Cabinet
|
Battery Cabinets are produced manufactured by Germarel in Germany in Europe. The performance is affected by the temperature of the place that is located. That's why, battery cabinet is the solution which is used for keep the batteries in safe. Our long year experiences help us to provide best battery cabinet solutions to our customers. We also produce IP65 outdoor NiCad battery cabinets with 48V DC fans.
>Contact form >Read more |
statıc transfer swıtch sts
|
Static Transfer Switch (STS), designed and manufactured in Germany and Europe, ensures secure and uninterrupted power for critical loads by automatically selecting the best available power source.
Available in 100A–2000A, 3-pole and 4-pole versions, our STS solutions support up to 5000 kVA with ±20% voltage tolerance, providing high efficiency, easy control, and maximum power reliability. |
Neutral Grounding Resistor
|
Neutral grounding resistor solutions are produced in Germany, Europe. The neutral ground resistor solution is our newest technological designed resistor for transformer centers to supply security to the transformer centers to manage the line security. Neutral Earthing Grounding Resistor is manufactured and designed to reduce technical problems like insulation breakdown caused by transient over-voltages produced by arcing ground faults in ungrounded systems and damage to prevent motors and switchgear caused by arcing in solidly grounded systems. The two main methods of system neutral grounding are low resistance and high resistance. The neutral grounding resistance system will trip to protect in the case of a line to ground fault. The neutral grounding resistor will limit the ground fault to a maximum of 100amper to 1000 Amper. The zero sequence neutral grounding resistors are for the transformers and ground fault relays will detect the fault and trip at 5 to 20% of the maximum ground fault current so can be monitored. Germarel is a producer manufacturer of NGR in Germany in Europe.
|
ATS AUTOMATIC TRANSFER SWITCH
|
The Automatic Transfer Switch (ATS), manufactured by Germarel in Germany (Europe), is designed to automatically transfer electrical loads between the utility (city grid) and generator power sources in case of a power failure or instability. ATS systems continuously monitor the availability of the main power supply. When the utility source fails or falls outside predefined limits, the ATS sends a command to start the generator and safely transfers the load to the backup power source.
The ATS ensures safe, controlled and reliable power transfer, where a short interruption during switching is acceptable and expected in low voltage power distribution systems. |
Marine UPS Systems
|
Germarel Marine UPS systems are designed and manufactured in Germany and Europe to deliver clean, uninterrupted power for shipboard and offshore applications. Using True Online Double Conversion technology, they ensure high reliability, extended battery life and maximum system uptime in harsh marine environments.
Germarel Marine UPS solutions are widely used in marine vessels, offshore platforms, ports, oil & gas, power plants, shipyards, telecom, data centers and other critical industrial applications. |
Battery Cabinet Solutions
|
|
Battery Cabinet systems are designed and manufactured by Germarel in Germany and Europe. Germarel is a leading manufacturer of industrial-grade battery cabinet solutions engineered to safely house, protect and organize batteries used in critical power and energy storage systems. Germarel Battery Cabinets ensure optimal environmental conditions through robust enclosure design, effective ventilation and thermal management, helping to extend battery lifetime, maintain stable performance and ensure safe operation under continuous industrial conditions.
|
ENERGY STORAGE SYSTEMS
|
Energy Storage Systems (ESS) are produced by Germarel, a leading manufacturer of industrial energy storage solutions from Germany, serving global industrial, commercial and utility-scale applications.
Our advanced ESS solutions integrate high-performance lithium-ion battery technology with intelligent Battery Management Systems (BMS), Power Conversion Systems (PCS) and Energy Management Systems (EMS). These systems are designed to maximize energy efficiency, ensure uninterrupted operation, extend system lifetime and reduce total cost of ownership. |
POWER TRANSFORMER SYSTEMS
|
Power Transformer Systems are produced by Germarel, a leading manufacturer of industrial power transformer solutions from Germany, serving global industrial, commercial, and utility-scale applications. Our advanced transformer solutions are engineered to provide reliable voltage transformation, electrical isolation, and stable power distribution. Germarel transformers are designed with high-quality core materials, optimized copper windings, and robust insulation systems to ensure high efficiency, long service life, and continuous operation under demanding industrial conditions.
|
OUTDOOR POWER SOLUTIONS
|
Outdoor Power Solutions are produced by Germarel, a leading manufacturer of industrial power conversion systems from Germany, serving global industrial, utility, marine and critical infrastructure applications.
Germarel Outdoor Power Solutions are engineered to deliver uninterrupted, stable and high-quality power for continuous outdoor operation, even under harsh environmental conditions. Designed with advanced power conversion technology, robust containerized structures and weather-resistant enclosures, Germarel systems ensure high efficiency, long service life and maximum reliability for critical outdoor and remote installations worldwide. |
Ground Power Unit
|
Ground Power Unit (GPU) systems are designed and manufactured by Germarel in Germany and Europe to deliver stable, low-distortion and high-quality 400 Hz power for aircraft ground operations. Advanced power conversion technology ensures precise voltage and frequency control, high efficiency and reliable continuous operation.
Germarel GPU systems are widely used in aviation ground power applications, airports, hangars, maintenance facilities, defense and military systems, radar and navigation systems, industrial 400 Hz applications and other critical power installations, suitable for both mobile and fixed outdoor use. |